Pure Epoxy 1.5 Quart Touch Up Kit, Up To 30 SF

Pure Epoxy 1.5 Quart Touch Up Kit, Up To 30 SF

$99.95

PURE Epoxy Kit for small areas when a touch up is necessary: 1 Quart Part A and 1 Pint Part B.

Color

Clear

SKU: PE-1P5Q

NON-SLIP RECOMMENDATIONS; Keep in mind that many types of floor finishes may be slippery when wet or have substances that may create a potential slip hazard. Keeping floors clean and dry is recommended. Please note the following non-slip recommendations:

Aluminum Oxide #46 Grit Broadcast is recommended to be used with: PURE 100% Solids Epoxy or METALLIC 100% Solids Epoxy.

Powder Oxide Additive (must only be used with polyurethane topcoats) is recommended when a POLYURETHANE Topcoat is desired.

COVERAGE: (2A to 1B mix ratio up to 30 SF per 1.5 Quart)

RECOMMENDATIONS; for your safety and for that of others please keep in mind that many types of floor finishes may be slippery when wet or has any inconspicuous foreign substances that may create a potential slip hazard. Keeping floors clean and dry is recommended.

Please note the following non-slip recommendations:

Aluminum Oxide #46 Grit Broadcast is recommended to be used with: PURE 100% Solids Epoxy or METALLIC 100% Solids Epoxy.

Powder Oxide Additive (only to be used with polyurethane topcoats) is recommended when a POLYURETHANE Topcoat is desired.

Epoxy Calculator

Project Calculator

Square Feet of job:

Flakes:

100% Solids Epoxy: (Input your sq/ft and desired flake broadcast)

Any Size Flakes: (Input your sq/ft and desired flake broadcast)

High-Wear Topcoat: (Input your sq/ft and desired flake broadcast)

Please Note: Due to varying surface porosities, our estimates are based on extensive experience. EpoxyPRO, LLC is not liable for material shortages due to substrate absorption, incorrect application, or aesthetic dissatisfaction. DIY instructions are provided in invoices and on our website. Technical support is available almost 24/7 (excluding Sundays after 1 pm EST). Customers can purchase additional materials if needed. Visit EpoxyPRO.com for details.

How to Apply 100% Pure Epoxy

Step 1. Grind the floor

Grind the floor with a concrete grinder, ensuring a cleaner and more porous surface for the epoxy product to bind to. This process takes 3-6 hours for a two car garage.

Step 2. Fill gaps and cracks

Use our concrete repair kit if you have any cracks larger than the width of a credit card. Hairline cracks are completely fine to leave.

Step 3. Mix part A and B

Combine parts A and B in a 5 gallon bucket, mixing with the provided mixing wand attached to a drill. Mix for no less than 4 minutes.

Step 4. Apply Epoxy

Using our 18″ Notched Squeegee, spread the epoxy evenly across the floor then use the roller to work it in. Apply in sections to ensure proper bonding, as well as to keep the work flow manageable.

Step 5. Broadcast Flakes

Sprinkle flakes evenly across the floor. Throw them up in the air, and let the flakes naturally fall to the epoxy. Wait 16-24 (not more than) hours before moving on to the next step.

Step 6. Apply Topcoat

The last step for a perfect epoxy floor is to apply a topcoat. This ensures long lasting effects and provides protection against chemicals, oil and more.