Epoxy Pro Industrial grade floor coatings are USDA approved and made of 100% solids epoxy and provide an anti-microbial non-porous, high gloss shield of protection and high heat resistance (against hot car tires) of which oils, salts, fluids, and silicone – based products cannot penetrate its protective shield, preventing surface and subsurface contamination.
Epoxy Pro DIY Garage Floor Epoxy coatings non-porous, high gloss and seamless finish will give your garage or shop up to 400% increased light reflectivity. Epoxy Pro is easy to clean, maintenance free, hides annoying imperfections that the concrete may have, and provides an extremely protective shield that is 10,000 X compression strength per square inch (psi) (versus concrete 400 pounds (psi). Epoxy Pro Pure Epoxy Floor Paint Coating Kit also offers many color options of solid color and/or custom epoxy colors of which you may choose – with or without decorative paint chips. Our epoxy paint chips are available in ¼ inch size paint chips or 1/16-inch size micro size paint chips. Epoxy Paint Chips, fleck, and/or flakes are broadcast onto the top of the wet epoxy floor surface immediately after the finish rolling step is complete. EpoxyPRO also offers many blend choices of which to pick from, or you can call us for single color paint chips in either size (¼ inch or 1/16 inch) to create your own customized decorative paint chip blend to create your own custom signature blend for your epoxy floor project. EpoxyPRO recommends to always broadcast our non-slip #46 grit aluminum oxide into all floor coating applications as a last and final step.
CUSTOM COLORS: are available for an additional cost and a minimum of 15-gallon order. Please call:1-877-703-7699 for pricing.
RECOMMENDATIONS: for your safety and for that of others please keep in mind that many types of floor finishes may be slippery when wet with snow, rain, water, fluids and/or any inconspicuous foreign substances that may create a potential slip hazard. Keeping floors clean and dry is recommended.
Please note the following non-slip recommendations:
- Aluminum Oxide #46 Grit Broadcast is recommended to be used with: PURE 100% Solids Epoxy or METALLIC 100% Solids Epoxy.
- Powder Oxide Additive (only to be used with polyurethane topcoats) is recommended when a POLYURETHANE Topcoat is desired.